CTLINND(8)
NAME
ctlinnd - control the InterNetNews daemon
SYNOPSIS
ctlinnd [ -h ] [ -s ] [ -t timeout ] command [ argument...
]
DESCRIPTION
Ctlinnd sends a message to the control channel of innd(8),
the InterNetNews server.
In the normal mode of behavior, the message is sent to the
server, which then performs the requested action and sends
back a reply with a text message and the exit code for
ctlinnd. If the server successfully performed the com-
mand, ctlinnd will exit with a status of zero and print
the reply on standard output. If the server could not
perform the command (for example, it was told to remove a
newsgroup that does not exist), it will direct ctlinnd to
exit with a status of one. The ``shutdown,'' ``xabort,''
and ``xexec'' commands do not generate a reply; ctlinnd
will always exit silently with a status of zero.
OPTIONS
-s If the ``-s'' flag is used, then no message will be
printed if the command was successful.
-t The ``-t'' flag can be used to specify how long to
wait for the reply from the server. The timeout
value specifies the number of seconds to wait. A
value of zero waits forever, and a value less than
zero indicates that no reply is needed. When wait-
ing for a reply, ctlinnd will try every two minutes
to see if the server is still running, so it is
unlikely that ``-t0'' will hang. The default is
``-t0.''
-h To see a command summary, use the ``-h'' flag. If
a command is included when ctlinnd is invoked with
the ``-h'' flag, then only the usage for that com-
mand will be given.
If a large number of groups are going to be created or
deleted at once, it may be more efficient to ``pause'' or
``throttle'' the server and edit the active file directly.
The complete list of commands follows. Note that all com-
mands have a fixed number of arguments. If a parameter
can be an empty string, then it is necessary to specify it
as two adjacent quotes, like "".
addhist <Message-ID> arr exp post paths
Add an entry to the history database. This directs
the server to create a history line for Message-ID.
The angle brackets are optional. Arr, exp, and
post specify when the article arrived, what its
expiration date is, and when it was posted. All
three values are a number indicating the number of
seconds since the epoch. If the article does not
have an Expires header, then exp should be zero.
Paths is the pathname within the news spool direc-
tory where the article is filed. If the article is
cross-posted, then the names should be separated by
whitespace and the paths argument should be inside
double quotes. If the server is paused or throt-
tled, this command causes it to briefly open the
history database.
allow reason
Remote connections are allowed. The reason must be
the same text given with an earlier ``reject'' com-
mand, or an empty string.
begin site
Begin feeding site. This will cause the server to
rescan the newsfeeds(5) file to find the specified
site and set up a newsfeed for it. If the site
already exists, a ``drop'' is done first. This
command is forwarded; see below.
cancel <Message-ID>
Remove the article with the specified Message-ID
from the local system. This does not generate a
cancel message. The angle brackets are optional.
If the server is paused or throttled, this command
causes it to briefly open the history database.
changegroup group rest
The newsgroup group is changed so that its fourth
field in the active file becomes the value speci-
fied by the rest parameter. This may be used to
make an existing group moderated or unmoderated,
for example.
checkfile
Check the syntax of the newsfeeds file, and display
a message if any errors are found. The details of
the errors are reported to syslog(3).
drop site
Flush and drop site from the server's list of
active feeds. This command is forwarded; see
below.
feedinfo site
Print detailed information about the state of the
feed to site or more brief status of all feeds if
site is an empty string.
perl flag
Enable or disable perl news filtering. If flag
starts with the letter ``y'' then filtering is
enabled. If it starts with ``n'', then filtering
is disabled.
feedinfo site
Print detailed information about the state of the
feed to site or more brief status of all feeds if
site is an empty string.
flush site
Flush the buffer for the specified site. The
actions taken depend on the type of feed the site
receives; see newsfeeds(5). This is useful when
the site is fed by a file and batching is going to
start. If site is an empty string, then all sites
are flushed and the active file and history
databases are also written out. This command is
forwarded; see below.
flushlogs
Close the log and error log files and rename them
to have a .old extension. The history database and
active file are also written out.
go reason
Re-open the history database and start accepting
articles after a ``pause'' or ``throttle'' command.
The reason must either be an empty string or match
the text that was given in the earlier ``pause'' or
``throttle'' command. If a ``reject'' command was
done, this will also do an ``allow'' command if the
reason matches the text that was given in the
``reject.'' If a ``reserve'' command was done,
this will also clear the reservation if the reason
matches the text that was given in the ``reserve.''
Note that if only the history database has changed
while the server is paused or throttled, it is not
necessary to send it a ``reload'' command before
sending it a ``go'' command. If the server throt-
tled itself because it accumulated too many I/O
errors, this command will reset the error count.
If the server was not started with the ``-ny''
flag, then this command also does a ``readers''
command with ``yes'' as the flag and reason as the
text.
hangup channel
Close the socket on the specified incoming channel.
This is useful when an incoming connection appears
to be hung.
help [command]
Print a command summary for all commands, or just
command if specified.
logmode
Cause the server to log its current operating mode
to syslog.
mode Print the server's operating mode as a multi-line
summary of the parameters and operating state.
name nnn
Print the name of channel number nnn or of all
channels if it is an empty string.
newgroup group rest creator
Create the specified newsgroup. The rest parameter
should be the fourth field as described in
active(5); if it is not an equal sign, only the
first letter is used. The creator should be the
name of the person creating the group. If the
newsgroup already exists, this is equivalent to the
``changegroup'' command. This is the only command
that has defaults. The creator can be omitted and
will default to the empty string, and the rest
parameter can be omitted and will default to ``y''.
This command can be done while the server is paused
or throttled; it will update its internal state
when a ``go'' command is sent. This command
updates the active.times (see active(5)) file.
param letter value
Change the command-line parameters of the server.
The combination of defaults make it possible to use
the text of the Control header directly. Letter is
the innd command-line option to set, and value is
the new value. For example, ``i 5'' directs the
server to allow only five incoming connections. To
enable or disable the action of the ``-n'' flag,
use the letter ``y'' or ``n'', respectively, for
the value.
pause reason
Pause the server so that no incoming articles are
accepted. No existing connections are closed, but
the history database is closed. This command
should be used for short-term locks, such as when
replacing the history files. If the server was not
started with the ``-ny'' flag, then this command
also does a ``readers'' command with ``no'' as the
flag and reason as the text.
readers flag text
Allow or disallow newsreaders. If flag starts with
the letter ``n'' then newsreading is disallowed, by
causing the server to pass the text as the value of
the nnrpd(8) ``-r'' flag. If flag starts with the
letter ``y'' and text is either an empty string, or
the same string that was used when newsreading was
disallowed, then newsreading will be allowed.
reject reason
Remote connections (those that would not be handed
off to nnrpd) are rejected, with reason given as
the explanation.
reload what reason
The server updates its in-memory copies of various
configuration files. What identifies what should
be reloaded. If it is an empty string or the word
``all'' then everything is reloaded; if it is the
word ``history'' then the history database is
closed and opened, if it is the word ``hosts.nntp''
then the hosts.nntp(5) file is reloaded; if it is
the word ``active'' or ``newsfeeds'' then both the
active and newsfeeds files are reloaded; if it is
the word ``overview.fmt'' then the overview.fmt(5)
file is reloaded. If it is the word ``fil-
ter.perl'' then the filter_innd.pl file is
reloaded. If a Perl procedure named ``fil-
ter_before_reload'' exists, it will be called prior
to rereading filter.tcl. If a Perl procedure named
``filter_after_reload'' exists, it will be called
after filter.pl has been reloaded. Reloading the
Perl filter does not enable filtering if it is dis-
abled; use filter to do this. The reason is
reported to syslog. There is no way to reload the
data inn.conf(5) file; the server currently only
uses the ``pathhost'' parameter, so this restric-
tion should not be a problem.
renumber group
Scan the spool directory for the specified news-
group and update the low-water mark in the active
file. If group is an empty string then all news-
groups are scanned.
reserve reason
The next ``pause'' or ``throttle'' command must use
reason as its text. This ``reservation'' is
cleared by giving an empty string for the reason.
This command is used by programs like expire(8)
that want to avoid running into other instances of
each other.
rmgroup group
Remove the specified newsgroup. This is done by
editing the active file. The spool directory is
not touched, and any articles in the group will be
expired using the default expiration parameters.
Unlike the ``newgroup'' command, this command does
not update the active.times file.
send feed text...
The specified text is sent as a control line to the
exploder feed.
shutdown reason
The server is shut down, with the specified reason
recorded in the log and sent to all open connec-
tions. It is a good idea to send a ``throttle''
command first.
signal sig site
Signal sig is sent to the specified site, which
must be a channel or exploder feed. Sig can be a
numeric signal number or the word ``hup,'' ``int,''
or ``term''; case is not significant.
throttle reason
Input is throttled so that all existing connections
are closed and new connections are rejected. The
history database is closed. This should be used
for long-term locks, such as when expire is being
run. If the server was not started with the
``-ny'' flag, then this command also does a ``read-
ers'' command with ``no'' as the flag and reason as
the text.
trace item flag
Tracing is turned on or off for the specified item.
Flag should start with the letter ``y'' or ``n'' to
turn tracing on or off. If item starts is a num-
ber, then tracing is set for the specified innd
channel, which must be for an incoming NNTP feed.
If it starts with the letter ``i'' then general
innd tracing is turned on or off. If it starts
with the letter ``n'' then future nnrpd's will or
will not have the ``-t'' flag enabled, as appropri-
ate.
xabort reason
The server logs the specified reason and then
invokes the abort(3) routine.
xexec path
The server gets ready to shut itself down, but
instead of exiting it execs the specified path with
all of its original arguments. If path is ``innd''
then /usr/sbin/innd is invoked; if it is ``innd-
start'' then /usr/sbin/inndstart is invoked; if it
is an empty string, it will invoke the appropriate
program depending on whether or not it was started
with the ``-p'' flag; any other value is an error.
In addition to being acted upon within the server, certain
commands can be forwarded to the appropriate child pro-
cess. If the site receiving the command is an exploder
(such as buffchan(8)) or it is a funnel that feeds into an
exploder, then the command can be forwarded. In this
case, the server will send a command line to the exploder
that consists of the ctlinnd command name. If the site
funnels into an exploder that has an asterisk (``*'') in
its ``W'' flag (see newsfeed(5)), then the site name will
be appended to the command; otherwise no argument is
appended.
BUGS
Ctlinnd uses the inndcomm(3) library, and is therefore
limited to server replies no larger than 4k.
HISTORY
Written by Rich $alz lt;rsalz@uunet.uu.net for InterNet-
News. This is revision 1.39, dated 1996/10/29.
SEE ALSO
active(5) expire(8) innd(8) inndcomm(3) inn.conf(5)
newsfeeds(5) overview.fmt(5).